How To Draw A Dragons Head

Download Commodity

Download Commodity

Drawing a dragon is a bang-up fashion to show your creativity, but it may exist challenging to draw the caput because it has a lot of particular. Luckily, you can get-go sketching the head with basic shapes before adding in the features. Fantasy dragons usually take pointier snouts and are the nigh mutual types in Western culture, while Chinese dragons have boxier heads. With a scrap of exercise, y'all'll be able to draw any type of dragon caput you lot want!

1. 1

   Draw a circle in the centre of your paper. Use a pencil and sketch your lines in lightly so you're able to erase them hands. Make the circumvolve in the heart of the folio, leaving room on each side of it so you have infinite to add more features. The circumvolve doesn't demand to be perfectly round, but you lot may use a compass to aid you lot depict your lines if you want.^[1]

   • The drawing of the dragon head will be in contour view when you lot're finished.
   • If you plan on calculation the residuum of the dragon's body to your drawing, then make sure the circle is pocket-size plenty so you can fit the body on your sheet of paper.
   • If you desire your dragon to take a longer face, then make a horizontal oval instead of a circumvolve.

2. two

   Add a rounded trapezoid on the side of your circle for the dragon's snout. Choose either the left or right side of the circle depending on which style yous want the dragon caput to face. Depict the top horizontal line of the snout coming from the top of the circle so information technology's the same length every bit the circle's diameter. Brand another horizontal line coming from the bottom of the circumvolve to make the bottom of the snout. Connect the 2 lines so the corners are rounded.^[2]

   • You tin brand the snout longer or shorter depending on how you lot want the dragon to wait.
   • Don't leave sharp corners on the terminate of the snout or else your dragon won't look natural.

   Advertisement

3. 3

   Make parallel lines coming out the lesser of the circle for the dragon's neck. Starting time ane of the lines where the bottom of the snout connects to the head. Make a curved line coming down from the caput equally long equally you lot want it. Then describe another curved line that's parallel to the start ane on the opposite side of the caput.^[iii]

   • The dragon's neck usually gets wider closer to its torso, and then you tin can brand the lines get farther apart virtually the bottom if yous desire to.

   Tip: Add a neck even if yous don't plan on drawing the residual of the dragon's trunk. That way, the head will all the same have the illusion that it'due south continued to something.

4. 4

   Sketch a curved horizontal line through the trapezoid to make a mouth. First drawing the rima oris in the middle of the trapezoid's narrow end. Extend the line horizontally so it ends near the middle of the dragon's caput. Curve the end of the rima oris upwards if yous want your dragon to wait like information technology's smiling, or angle it down if you want it to frown.^[4]

   • Put a parallel line underneath the mouth if you want information technology to look like your dragon has a bottom lip.

5. 5

   Describe triangles coming out from the rima oris to give your dragon teeth. You can either add teeth that point up or downwardly along your dragon'southward mouth. Cull anywhere along the mouth and draw a triangle that points up or downward starting from the oral fissure line. Add five-half dozen split up teeth in your dragon's oral cavity so information technology looks more fearsome.^[5]

   • Don't line the entire mouth with teeth or else your drawing may start to look messy.
   • You can have teeth pointing both up and downwards.

6. vi

   Put a circumvolve or triangle above the oral cavity to brand an eye. Identify the eye next to where the acme of the snout connects to the side of the circle. If you want your dragon to look more than realistic, draw a small-scale circle for the middle then there's a small gap between information technology and the top of the snout. For a dragon that looks angrier, add a horizontal triangle so the signal faces the snout.^[6]

   • Don't brand the center too large or else yous won't have room to add other features.
   • Search for pictures of other reptiles to see what their eyes wait like and then you can use them as a reference.

7. 7

   Add bumps and ridges on the superlative of the dragon's head for more texture. Dragons don't have smoothen pare, so their heads volition wait bumpy and knobby from their scales. Use the outlines yous currently take as guides and go over them to add curves to the snout. Use wavy or zig-zag lines going from the end of the snout toward the back of its head.^[vii]

   • For example, you may add a large bump to a higher place the dragon'southward eye if you lot want to give it a prominent brow.
   • You can add together as many or as few bumps and ridges to the dragon depending on how yous want it to expect.

8. 8

   Give your dragon horns if y'all want to. If y'all want to add horns to your dragon, make a vertical line extending out from the top of the dragon'south head. Extend the line out so it's nigh the same length every bit the snout. Add another line that starts on the dorsum side of the dragon'due south head and connects to the cease of the first line to complete the horn.^[8]

   • Make the horn shorter if you want to make information technology seem like your dragon is younger.
   • Yous can make the horns whatever shape you desire. Look up horns on real animals to get influences for what you can include on your dragon.
   • You may also choose to add horns or spikes running down the back of the dragon's neck if you want to.

9. 9

   Erase the lines you lot used as guides. Go over your drawing with an eraser and get rid of any lines that aren't still a office of your dragon. For example, you may erase the circle or the original outline of the snout if you added more bumps to it. Proceed erasing whatever guides or mistakes y'all made, and blow off the shavings when you lot're finished.^[ix]

   • Darker lines volition be harder to erase than lightly sketched lines.
   • Get a clickable detail eraser if you need to erase lines in small areas. You can go special erasers from an art store or online.

10. 10

    Add details like scales and nostrils to make your dragon seem realistic. Once you erase the guide lines, beginning adding the concluding details into your drawing. Beginning with small ovals or circles for the nostrils at the end of the snout. Once you add the nostrils, draw in U-shaped lines on the sides of the dragon's head and down its neck give the illusion of scales.^[10]

    • You don't need to describe every calibration on the dragon's face up since it could make your drawing look messy or unclear.
    • Shade your drawing with a pencil or colored pencil if you want to add more perspective or colour.

11. 11

    Finished.

    Advert

1. one

   Make a circle with a rounded rectangle for the dragon'southward head and snout. Start past making a circumvolve in the centre of your slice of paper so you lot accept room to add together features on each side. Choose the correct or left side of the circle to put the snout depending on what direction you want the dragon to face. Start the rectangle halfway down from the top of the circle and connect the bottom edge to the lowest point of the circle.^[eleven]

   • You tin choose to make the dragon'south snout thicker if you want.
   • When you're finished, your dragon head will be in profile view.
   • Sketch your lines lightly at beginning so you tin hands erase them later. Otherwise, you'll get out marks on the paper that yous can't get rid of.

2. 2

   Sketch in the dragon's neck coming out from the other side of the head. Kickoff a line at the point where the lesser of the snout touches the circle. Curve the line slightly down so it looks like it extends off of the page. Draw the top of the neck coming from the top side of the circle so information technology'southward parallel with the starting time line you drew.^[12]

   • While you don't have to draw the neck for your dragon, it adds to the illusion that the head is continued to a body.
   • Chinese dragons take long, serpent-similar bodies, so the cervix will stay the same thickness the entire time.

3. 3

   Describe a horizontal line and triangles to give your dragon a mouth and teeth. Get-go the line for the mouth so it'southward a third of the way upwardly from the bottom of the rectangle. Make a slightly curved horizontal line that ends nigh the centre of the dragon'south head. Draw small triangles coming out from the top or bottom of the line to give the dragon abrupt teeth.^[13]

   • Give your dragon a smile if you desire information technology to await happy or a frown if you want information technology to appear more vehement.
   • Only add a few teeth to the oral fissure so the drawing doesn't look messy.

4. 4

   Add a circle or oval in a higher place the mouth for your dragon's eye. Place the eye for your dragon within the circumvolve so it's adjacent to where the top of the snout connects to the head. Make a circle or a horizontal oval for the center then there'southward a small gap between it and the top of the head. Add an angled line in a higher place the eye to requite your dragon an angry forehead.^[14]

   • The dragon's pupil can be round like a human being, or you can make information technology expect like a slit, like to a ophidian or cat.
   • Don't make the eye too large or else the dragon will look unnatural and you won't have room to place the rest of the features.

5. v

   Depict antlers or horns on acme of your dragon's head. Chinese dragons usually accept antlers that expect similar a deer, simply they can also have standard spiked horns. If you lot want to add antlers, Draw a Y-shape coming out from the back of the dragon's head. Add lines on either side of the Y-shape then the antler ends in curved points. If y'all want to make horns, draw a long triangle coming out from the back of the dragon's head instead.^[15]

   • You don't demand to add antlers or horns at all if yous don't desire to.

6. 6

   Sketch in ears underneath the antlers. Unlike many other dragons, Chinese dragons have ears on the sides of their head that expect similar to moo-cow or deer ears. Draw a curved line coming out from the side of the dragon'due south caput and extend information technology so it's about one-half every bit long as the head'due south diameter. Add another curved line underneath the commencement one and connect the ends to brand the ear.^[sixteen]

   • You don't demand to draw the ear on the other side of the caput since you wouldn't be able to run into it from this perspective.

7. vii

   Give your dragon a beard and mane. Chinese dragons take pilus and manes around their heads that resemble a lion. Put in wavy lines that end in points around the bottom of the snout and the back of the head. Draw the hair in tufts rather than calculation the individual strands so your drawing doesn't get muddled.^[17]

   • The mane will go behind your dragon's horns or antlers if information technology has them.
   • You tin make the hair as long or short as you want.

8. eight

   Erase the guide lines that aren't a part of your dragon's head. Use the eraser on your pencil or a block eraser to clean up the lines on your drawing. Erase whatsoever of the lines that y'all were using equally guides, such as the sides of the circle or parts that are overlapped by pilus. Proceed getting rid of lines you don't need in your drawing anymore and accident the shavings off when you're done.^[eighteen]

   Warning: Don't wipe the drawing with your manus when y'all're done erasing your lines since you could easily smudge the pencil.

9. nine

   Add nostrils and whiskers to the snout. Put in small circles or ovals near the front of the snout for your dragon's nostrils. Exit a small gap beside the nostril before drawing a long wavy line that ends well-nigh the back of the dragon's head. Brand some other parallel wavy line directly underneath the first one and connect the ends to add together the whisker.^[19]

   • Depict minor fume clouds coming out from the dragon's nostrils if you want to make it seem like it's about to breath fire.
   • Shade your drawing with your pencil to go far wait more realistic and add perspective.
   • Use colored pencils if yous want your dragon to look more colorful.

10. 10

    Finished.

    Advert

Add New Question

• Question

  Why would I effort shading the cartoon rather than redoing the color?

  

  Shading makes the art look more real. Redoing the color makes it look more like a cartoon.

• Question

  What if this is difficult for me?

  

  Jacquelyn Helmuth

  Customs Answer

  Endeavor sketching it lightly and employ the picture of the dragon you desire to describe. Then, lightly draw what yous encounter and, if you happen to get the shape you lot want, depict a little darker. With practice, yous will ameliorate.

• Question

  How do you make ballsy scenes with dragons that POP out at you?

  

  Use dramatic shading. For instance, if your dragon is facing slightly left, add shading under its chin, along its neck, at the left finish of its eyes, and at the base of its horns.

• Question

  How practise I depict a dragon's eye?

  

  Draw a more rounded outline than that of a human, more like a true cat's eye. Give the eye a thin, curved pupil. Add shading to suggest a colored iris and surround the eye with scales.

• Question

  What would exist a good background for a dragon?

  

  Tokayyoshi

  Community Reply

  If it's a fire-breathing dragon, add flames! If your dragon lives in the bounding main, draw fish, coral, and bubbling.

• Question

  How tin I make a drawn dragon appear lifelike?

  

  Add together lots of shading, i.e., describe where the lighting would show.

• Question

  I could not draw these without running into a problem. Is there an easier way?

  

  Information technology depends on your level of ability. If you want simpler processes, you can start with easier dragons and build up from in that location.

• Question

  How would I draw a frill?

  

  Frills look like smaller versions of wings that are attached to the head. Just look at wing references and size them down. If you need a better visual, tissues and pipe cleaners will help you become the positioning right.

• Question

  Is there a simpler fashion to depict the dragon's horns?

  

  Yous can brand ii wavy lines that connect at the top and grade a signal, and if that doesn't work, y'all tin make a stretched triangle with some overlapping peel at the base of operations.

• Question

  How do I draw a cave for my dragon?

  

  You can draw a cave by drawing a rocky circle and adding shading in the background, darkening as you go deeper. Try to make the cave walls uneven, and if you desire, add some hanging rocks, rocks hugging the cave wall, etc. Gray or brown would exist skilful default colors, but yous can add together multiple colors if you want to include glowing jewels and gems.

See more answers

Ask a Question

200 characters left

Include your email address to go a message when this question is answered.

Submit

Advert

Video

• Utilize pictures of other animals for reference if you want to brand your dragon more unique or add unique features. For example, you can requite your dragon a bill like a turtle or a

Thanks for submitting a tip for review!

Advertizement

Things You'll Demand

• Paper
• Pencils
• Eraser
• Colored pencils (optional)

Virtually This Article

Commodity Summary X

To draw a dragon head using shapes, start past drawing 2 circles close together to make the eyes. Then, draw 2 wedge-like shapes for the snout, and sketch the cervix using long, curvy lines, similar to the epitome of a snake. Side by side, use triangles and trapezoids to shape the back of the head, and draw cones and mounds to represent parts like the horns or locks of hair. Afterwards, refine the lines and add together details such as fins and spikes. Finally, erase any unnecessary lines and colour your dragon equally desired. To learn more, including how to describe a dragon head using animal references similar goats and crocodiles, read on.

Did this summary help you?

Thanks to all authors for creating a page that has been read 557,347 times.

Did this commodity help y'all?

Source: https://www.wikihow.com/Draw-a-Dragon-Head

Posted by: boothbyfirad1964.blogspot.com

Share this post